Why Your IKEA PAX Doors Aren’t Sitting Right (And How We Fix It) 🚪✨ 

The IKEA PAX wardrobe system is one of the most popular flat pack storage solutions on the market — and for good reason. It’s affordable, stylish, and incredibly flexible. But there’s one problem many customers face:

👉 Getting the doors to sit straight and align properly.

Misaligned PAX doors don’t just look messy — they can make your wardrobe difficult to open, damage hinges over time, and ruin the clean, modern finish you were aiming for.

At BJD Flat Pack Assembly, we’ve assembled and repaired hundreds of PAX wardrobes across Portsmouth, Southampton, Chichester, Emsworth, Guildford, and the wider Hampshire area. We know exactly why these doors go wonky — and more importantly, how to fix them.

Common Causes of IKEA PAX Door Misalignment (And How We Fix It)

1. The Wardrobe Frame Isn’t Square or Level 🪚

This is the number one cause of door alignment problems. Even a slight twist or tilt in the PAX frame throws the doors off. This often happens if the floor isn’t level or the units weren’t joined correctly.

✅ Our Fix: Before installing the doors, we ensure the entire PAX frame is perfectly square and level using precision tools and shims where needed. A solid foundation = straight doors.

2. Uneven Floors and Walls 🏡

Not all walls and floors are perfectly square — especially in older or converted properties. Even if the PAX frame itself is assembled correctly, uneven flooring or bowed walls can make the wardrobe lean or twist ever so slightly. This creates gaps between doors, makes them rub or stick, and throws off the clean lines of the wardrobe.

✅ Our Fix: We carefully check the floor and wall alignment during installation. If needed, we use shims or packers under the wardrobe to level it out precisely. This ensures the structure sits plumb and stable — so the doors hang straight and operate smoothly.

3. Incorrect Hinge Installation or Adjustment 🔩

The PAX system uses adjustable hinges to fine-tune the door position. If they’re installed incorrectly or haven’t been properly adjusted, the doors won’t sit flush.

✅ Our Fix: We install hinges correctly from the start and carefully adjust the three hinge screws (up/down, left/right, in/out) to align the doors perfectly with clean, consistent gaps.

4. The Wardrobe Isn’t Secured to the Wall 🧱

A tall PAX unit must be fixed to the wall. Without anchoring, the wardrobe can lean forward or backward, making doors appear crooked and creating a tipping hazard.

✅ Our Fix: We always secure PAX wardrobes to the wall with the correct fixings for your wall type. This ensures safety and keeps the doors aligned.

5. Obstructions or Uneven Weight Distribution 📦

Improperly installed internal organisers or unevenly stored items can push doors out of alignment over time.

✅ Our Fix: We install all internal components correctly and advise on balanced weight distribution so your wardrobe stays straight and stable.

6. Damaged Components 🪛

Sometimes the culprit is a faulty hinge, door, or frame panel.

✅ Our Fix: We inspect components before assembly, identify damage, and guide you on getting replacements if needed.

Why Choose BJD Flat Pack Assembly for Your IKEA PAX Wardrobe?

Assembling a PAX wardrobe can be deceptively tricky — especially with multiple doors. It requires accuracy, patience, and the right tools. At BJD Flat Pack Assembly, we:

• ✅ Have years of hands-on experience with IKEA wardrobes

• 🛠️ Use professional tools to ensure level frames and perfect alignment

• 📍 Cover Portsmouth, Hampshire, West Sussex & Surrey

• 💬 Offer advice to help keep your wardrobe aligned long after installation

Whether you’ve tried to install it yourself or want a professional build from the start, we’ll make sure your doors sit straight, your hinges work smoothly, and your wardrobe looks its best.

✅ Perfect alignment.
✅ Professional finish.
✅ Zero hassle.